The analog version of this sensor (SQ-500) comes with the inline cable connector placed 30 cm from the sensor head for either standard use as a long-cable pigtail sensor, or for use with the microCache Bluetooth Micro Logger by unscrewing the connector, discarding the long section of cable and then screwing the sensor to the mating connector on the microCache.
Specifications
- Power Supply Self-powered
- Output (Sensitivity) 0.01 mV per µmol mˉ² sˉ¹
- Calibration Factor (Reciprocal of Sensitivty) 100 µmol mˉ² sˉ¹ per mV
- Calibration Uncertainty ± 5 %
- Calibrated Output Range 0 to 40 mV
- Measurement Range 0 to 4000 µmol mˉ² sˉ¹
- Measurement Repeatability Less than 0.5 %
- Long-term Drift Less than 2 % per year
- Non-linearity Less than 1 % (up to 4000 µmol mˉ² sˉ¹)
- Response Time Less than 1 ms
- Field of View 180Ëš
- Spectral Range 389 to 692 nm ± 5 nm (wavelegths where response is greater than 50 % of maximum)
- Spectral Selectivity Less than 10 % from 412 to 682 nm ± 5 nm
- Directional (Cosine) Response ± 5 % at 75˚ zenith angle
- Azimuth Error Less than 0.5 %
- Tilt Error Less than 0.5 %
- Temperature Response -0.11 ± 0.04 % per C
- Uncertainty in Daily Total Less than 5 % Detector Blue-enhanced silicon photodiode
- Housing Anodized aluminum body with acrylic diffuser
- IP Rating IP68
- Operating Environment -40 to 70 C; 0 to 100 % relative humidity; can be submerged in water up to depths of 30 m
- Dimensions 24 mm diameter, 37 mm height
- Mass 100 g (with 5 m of lead wire) Cable 5 m of shielded, twisted-pair wire with TPR jacket (high water resistance, high UV stability, flexibility in cold conditions)
- Warranty 4 years against defects in materials and workmanship
Ordering information
SQ-500-SS