Request list

is empty

You are here

InsiteIG OEM Suspended Solids Analyser

If you cannot find the part number in the documentation please provide detail. Specific to this item, it could include part number or application detail, (ex. 20 meters of cable, or 20 litres of volume)

The InsiteIG Model 4000 dual channel analyser is a unique system that combines advanced electronics with solid-state optical sensors. The analyser will accept any combination of two sensors, (DO or SS) and automatically configure for the correct operation. The system allows for flexible and economical mixed liquor monitoring and control. The DO sensor does not need membranes, fill solutions, nor routine calibrations and maintenance. The SS sensor is based on near infrared technology, which eliminates inaccuracies caused by changes in the process colour or changes in particle size.

12 volt Suspended Solids Analyser M4000 with 0-1V output

There are two different sensors that cover a range of 0 to 30,000 mg/l;

Model 15L was designed to measure low ranges (0 to 1500 mg/l) typically found in plant and clarifier effluents.

Model 15 was designed to measure higher solids concentrations (400 to 30,000 mg/l) typically found in mixed liquor, RAS, and WAS.

Using a near-infrared wave length (880 nanometers) virtually eliminates shifts in calibration caused by colour variations in the process being measured. As almost all processes will have slight changes in colour, using near-infrared reduces calibration events and provides better accuracy.

Output 0 - 1 volt

Ordering Information:
When ordering TSS specify Model 15 (0-30,000) or Model 15L (0 to 1500) mg/l
M4000-1 Insite IG Model 4000 12V DC Powered Analyser with 1 TSS sensor
M4000-2 Insite IG Model 4000 12V DC Powered Analyser with 2 TSS sensors

Options
M4000-1 Insite IG Model 4000 12V DC Powered Analyser with 1 Optical DO sensor
M4000-2 Insite IG Model 4000 12V DC Powered Analyser with 2 Optical DO sensors