Request list

is empty

You are here

EchoFlo Ultrasonic Depth Sensor

If you cannot find the part number in the documentation please provide detail. Specific to this item, it could include part number or application detail, (ex. 20 meters of cable, or 20 litres of volume)

The MACE EchoFlo features patented DSP technology that allows level measurements in a limited space. With a minimal 2" (50mm) dead band and narrow beam-width, the EchoFlo can be deployed in a diverse range of applications. These include: wastewater flow measurement through flumes (coupled with a MACE FloPro or HydroMace 3000); level measurement in small tanks and sumps; depth measurement in pipes; and any number of other control automation applications where non-contact level measurement is desirable or necessary.

The MACE EchoFlo is easy to configure using the free EchoCal software and is economical to purchase and install.

In a world-first, a typical flow measuring application in a partially full, closed pipe is shown below. The MACE EchoFlo (mounted on the top of the pipe) measures the depth and a MACE Doppler sensor (2" insert) measures velocity. Together, these two sensors are connected to a Series 3 FloPro that calculates, records and displays the resultant flow rate.

Key Benefits:
• Patented DSP technology - small dead band and beam width
• Compact, rugged design for deployment in applications with limited space and corrosive media
• Quick and easy configuration, no coding knowledge required

1.25m (49.2”) (+/- 0.24% Range)
2.5m (98.4”) (+/- 0.2% Range)

Resolution: 0.5mm (0.019”)
Beam width: 5cm (2”)
Dead band: 5cm (2”), 10cm (4”)

Supply voltage: 12-24 VDC
Consumption: 0.5W
Signal output: 0 - 5 V, 0 - 10 V, 976 - 2000 Hz
Frequency: Sink current = 15 mA nominal
Fail-safety: Full, empty, hold last
Configuration: EchoCal Software, USB 2.0

Temp. comp.: Automatic over range
Process temp.: C: -7˚ to 60˚
Ambient temp.: C: -35˚ to 60˚
Pressure: MWP = 206.8 kPa (30 PSI)

Enclosure: IP67 (Type 6P) encapsulated, corrosion resistant & submersible
Enclosure material: Polycarbonate
Strain relief material: Santoprene
Trans. material: PVDF

Cable length: 1.2 m (48”)
Cable jacket mat.: Polyurethane
Process mount: 1” NPT
Mount. gasket: Viton®

Classification: General purpose
Approvals: CE, cFMus

Ordering Information:
850-341 EchoFlo Ultrasonic Depth Sensor 1.25m
850-343 EchoFlo Ultrasonic Depth Sensor 2.5m