Model 408 Double Valve Pumps

Model 408 Double Valve Pumps

The Solinst Double Valve Pump (DVP) is a pneumatic drive pump that allows consistent, high quality samples. It has been field proven in thousands of applications.
It offers excellent performance and reliability. No bladder replacement is required, and the Double Valve Pump provides higher pumping rates than with the Solinst Bladder Pump. There is a selection of sizes and materials, variable flow rates, and it is field serviceable.
The DVP is suitable for low flow or regular flow sampling. The stainless steel pumps can operate to depths of 150 m (500 ft).

Add to Request

Features:

Easy Decontamination: everything easily accessible; replaceable and with interchangeable parts. All components can be cleaned with mild detergent or non-phosphate soap.

Survives Dry Pumping, Dirty Air and Sand Pumps are not damaged by operation in sediment laden water, or in dry pumping conditions. 

Saves Time and Costs Low flow sampling reduces purge volumes and the time it takes to obtain a sample. There is less need for repeat sampling, which reduces the time needed for each sampling round.

Part of Simple System The air compressor or tank, pump controller, and flowthrough cell are easily transported to each site with the DVP. Compression fittings, quick-connect, and push-fit connections allow simple attachment to well caps or portable reels.

Applications

Low Flow Sampling Gives excellent VOC retention, comparable with bladder pump results. When using the Solinst Model 464 Electronic Pump Controller, the DVP can be adjusted to provide a continuous output of 100 ml/min or less.

Non-Vertical Applications: – operates effectively at almost any angle and can be placed under landfills, tailings, storage tanks or plumes.

Leachate/Product Pumping Pneumatic drive pumps may be used for pumping contaminant liquids. High solids content, solvents, hydrocarbons, and other chemicals are easily and economically pumped.

Dedicated and Portable Systems

For long term monitoring it is best to dedicate the pumps to reduce sampling time and avoid cross-contamination. Dedicated well caps are designed for ease of use. Caps easily slip onto 2″ or 4″ wells, and have quick-connect fittings for the drive tubing and easy push-fit connections for the sample tubing. For less frequent sampling, reel mounted portable systems allow access to multiple monitoring wells, even in remote locations. The reel mounted portable units are free-standing with a convenient carrying handle. They can be made for almost any size or depth of application

Sizes and Materials

Solinst offers Double Valve Pumps in 316 stainless steel with o-rings. The two standard pump body sizes are: • 5/8″ dia. x 1 ft long (16 mm x 305 mm) • 1.66″ dia. x 2 ft long (42 mm x 610 mm) Standard dedicated systems use 1/4″ OD (6 mm) sample and 3/8″ OD (10 mm) drive tubing. Adaptors for both 1/4″ and 3/8″ OD (6 mm and 10 mm) tubing are included. Portable systems use dual 1/4″ OD (6 mm) skip-bonded tubing. The Micro Double Valve Pump is a flexible, 3/8″ (10 mm) diameter, PTFE Pump. It is ideal for low flow sampling in narrow applications. (See Solinst Model 408M Data Sheet).

Ordering Information:

103104  408 Mk3 SS Double Valve Pump, 5/8″ x 1ft (1/4 dual)

114839  408 SS DVP 1.66″x2ft (3/8″D & 1/4″S) 316 SS Balls – Barb

408-double-valve-pump-spec-sheet

Weight 3 kg
Scroll to Top