1.66″ Geotech Portable Bladder Pumps

Constructed of 316 Stainless Steel
For unsurpassed durability and truly representative samples

Portable turnkey systems available
Everything you need to quickly and efficiently sample your site

Single turn release housings
No special tools or training required to service the pump

Quick-change bladder configuration
Bladders can be easily exchanged without tools by sliding back the Teflon® collars

Extra bladders are readily available
Available in Teflon® and Polyethylene (1.66″ pump only)

Bonded tubing
In Polyethylene and Teflon® lined Polyethylene by the foot or by the roll

Compatible with the GeoControl Pro & Geocontroller II Logic Units

Geotech’s pneumatic Portable Bladder Pumps operate with a unique action, ideal for both, gentle low-flow sampling and high flow rate purging. Timed on/off cycles of compressed air alternately squeeze the flexible bladder to displace water out of the pump to the surface and exhaust allowing the pump to refill. Fluid enters the pump through the fluid inlet check valve at the bottom of the pump body, via hydrostatic pressure (automatically by submergence). The bladder then fills with fluid. Compressed air enters the space between the bladder and the interior of the pump wall housing. The intake check valve closes and the discharge check valve opens. The compressed air squeezes the bladder, pushing the fluid to the surface. The discharge check valve prevents back flow from the discharge tubing. Driven by the GEOCONTROL PRO, this cycle automatically repeats.

Compressed air does not contact the sample! The bladder prevents contact between the pump drive air and the sample.

SPECIFICATIONS
Pump Housing: 316 SS
Pump Ends: 316 SS
Bladder Material: Virgin PTFE

Outer Diameter: 1.66″
Length w/Screen: 19″
Weight: 3.0 lbs.
Volume/Cycle: 124 mL
Min. Well I.D.: 2″
Max. Operating Pressure: 100 psi
Min. Operating Pressure: 5 psi (ash)
Maximum Sampling Depth: 200′ (60m)

Ordering Information:
38” (96.5 cm) Length Pump
81150100 Bladder pump 1.66SS36 screened .170x.25 x .25×3/8″
81150105 Bladder pump 1.66SS36 no screen .170x.25 x .25×3/8″
81150106 Bladder pump 1.66SS36 drop tube .170x.25 x .25×3/8″
51150100 Assy bladder cartridge 1.66×36 SS
20” (51cm) Length Pump
81150107 Bladder pump 1.66SS18 screened .170x.25 x .25×3/8
81150108 Bladder pump 1.66SS18 no screen .170x.25 x .25×3/8
81150109 Bladder pump 1.66SS18 drop tube .170x.25 x .25×3/8
51150114 Assy blader cartridge 1.66×18 SS

PVC Pump
81150103 Bladder pump, 1.66PVC36 screened
51150107 Assy, bladder cartridge 1.6×36 PVC
81150102 Bladder pump, 1.66PVC36 screened
51150106 Assy, bladder cartridge 1.6×18 PVC

Spare
17200072 Hosebarb custom MOD 1/4×1/8 MPT for 1/4″ air line
17200357 Hosebarb custom MOD 3/8×1/4 MPT for 3/8 discharge
Wrench spanner BP check availability
51150115 Assy intake screened drop tube
81201003 Safety cable bracket w/loop
17200156 F, hosebarb SS6 1/2×1/2 MPT
17200233 F compression SS6 5/8″x1/2MPT

1.66 BLADDER PUMP TUBING
77050521 ft Tubing .170×1/4 PE-1/4*3/8 PE
77050522 ft Tubing .170×1/4 PE-1/4*3/8 TLPE
77050528 ft Tubing 1/4″x3/8″-1/4×3/8 TLPE