You are here
Solinst 101 Water Level Meters
For measuring the depth of water in wells, boreholes, and standpipes, the Model 101 Water Level Meter is the most accurate and reliable of the Solinst meters. It is easy to operate and read to 1/100 ft. or to each millimetre. Also available, from Solinst, is the less expensive Model 102 Coaxial Cable Water Level Meter for use in small diameter tubes.
Solinst Water Level Meters Model 101
The Model 101 Water Level Meter uses a choice of probe designs, attached to a permanently marked polyethylene tape, fitted on a well-balanced reel. It is powered by a standard 9 volt battery housed in an easy-access battery drawer. The conductors embedded within the tape each have seven strands of stainless steel for strength and flexibility. The probe incorporates an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.
• Markings each 1/100 ft. or millimeter
• Traceable to national standards
• Sensitivity adjustable to conductivity
• Shielded probes to avoid false readings
• Permanent, heat impregnated markings
• Non-stretch stainless steel conductors
• Rugged, corrosion proof components
• Strong, flexible tape, is easily spliced
• Easy to repair
Model 101M Mini Water Level Indicator (Narrow Flat Tape)
The Mini 101 Water Level Indicator is ideal for use in narrow diameter applications as small as 3/8” (10 mm). The Mini 101 Water Level Indicator is available in 25m lengths.