Water level and probe depth measurements are read off the accurate Solinst flat-tape marked every 1/100 ft or each millimeter.
Applications
• Profiling conductivity and temperature in wells and open water
• Salinity studies
• Saltwater intrusion investigations
• Testing for water quality impairments from road salt
• Tracer tests
• General indication of chemical contamination level
• Early warning of changes in water quality at:
-Landfills
– Industrial Sites
The conductivity range is from 0-80,000 µS/cm. Conductivity and temperature measurements are displayed on a rotating LCD screen on the face of the reel. Conductivity accuracy is 5% of reading or 100 μS (which ever is greater). A light and buzzer are briefly activated when the zero point of the probe enters water. The depth to water and depth of displayed readings are read off the tape. The 9V alkaline battery is housed in an easy-access battery drawer and provides up to 90 hours of use.
• Accuracy is to the greater of 100 µS or 5% of reading
• Rugged Solinst reel and accurate tape
• Lengths to 300 ft. (100 m), probe dia. is 3/4″ (19 mm)
• Display that rotates for easy reading
• Standard 9V alkaline battery gives 90 hrs. of use
• Auto-Off after 8 minutes
Ordering Information:
100ft 30m
200ft 60m
300ft 100m
500ft 150m
750ft 200m
1000ft 300m
107-spec-sheet