• Brush-less motor handles challenging applications with minimal maintenance
• Non-chip epoxy-coated, washdown IP55-rated steel enclosure protects against moisture, chemicals, and dust
• Compact drive is light enough to carry with one hand, but powerful enough to drive two pump heads
• Speed control via three-turn potentiometer for quick, easy adjustments
• Speed is displayed on an easy-to-read LED display from 0 to 100% of full speed, with 1% resolution.
• Remote outputs: “pump ready” signal and 4 to 20 mA outputs (requires 77300-32 remote cable kit)
• 1.8-m (6-ft) line cord with IEC 320/CEE 22 socket
The brushless drive controls the speed of MASTERFLEX I/P Pump Heads to provide variable flow rates from 0.2 to 17 L/min (0.06 to 4.5 gallons/min). Achieve up to 26 LPM (7 GPM) with two stacked Standard or EASY-LOAD I/P Pump Heads. One MASTERFLEX High-Performance I/P Pump Head may be driven.
SPECIFICATIONS
RPM: 50 to 650
External control, input 4 to 20 mA, 0 to 10 V, start up, direction
External control, output ”Pump ready“ signal
Voltage (50/60 Hz): 115 or 230 VAC auto selected
Motor type: Brushless DC TENV†
Speed control type: PWM microprocessor
Speed regulation (repeatability): ±0.25% (2% of max rpm)
Digital display: 3-digit green LED, percent of speed
Operating temperature: 0 to 40°C
Storage temperature: –45 to 65°C
IP rating: IP55
Agency approvals: UL, cUL, CE
Controller dimensions (L x W x H): 19 x 10 x 9 cm
Shipping weight: 13 kg (28 lb)
Ordering Information:
950-1050 Easy-Load I/P Standard Process Pump
960-1050 High-Performance I/P Standard Process Pump
masterflex-analog-process-drive-spec-sheet-2008