Features
• Non-Corrosive, Robust PVC & Stainless Steel Construction
• Dual Reed Switch
• Suitable for Pipe Flow Measurement and water drain measurement
• Bucket Tip Volumes can be between 0.5 Litre up to 1.0 Litre
• Suitable for Harsh Environment
Description
The Hydrological Services Flow Gauge is considered to be one of the most accurate flow gauges used for measuring water flow coming out of a pipe or a drain. The unit comes with a dual reed switch, thus, when connected to a Hydrological Services data logger, the data can be stored and collected when required. In addition, the flow gauge can be telemetred by connecting one of the hydrological services data loggers
to a GSM or PSTN modem
SPECIFICATIONS
Material: PVC Plastic and Stainless Steel
Reed Switch: dual reed switches potted in soft silicon rubber with varistor protection.
– Max Capacity: 12 VA (0.5 amp max.) (24VDC are available on request)
– Resistance: Initial contact resistance 0.1 Ω
– M.T.B.F: 108 to 109 Operations
Dimensions: Length 390mm, Width 180mm, Height 345mm.
Ordering Information:
TBL TIPPING BUCKET FLOW GAUGE (CALIBRATION FROM 0.5 TO 1.0L:MAXIMUM FLOW RATE IS 28L / MINUTE AT 1L TIPS)
Accessories
Minilog Digital Data Logger
WinComLog
Modem ( GSM or 3G or PSTN)
TRD Counter
hs-tb1l-spec-sheet-2007