The CHEMets Method
To perform a test, immerse the CHEMet ampoule into the sample and snap off the tip (Step 1) – the correct volume of sample is automatically drawn in, filling the ampoule; a small inert gas bubble remains in the ampoule. To facilitate mixing the sample and reagent, tilt the ampoule back and forth so the bubble travels from end to end (Step 2). In 2 minutes or less, quantify the result by comparing the filled ampoule to the appropriate colour standard(s) (Step 3). For higher concentrations, the flat comparator is used. For lower concentrations, the round comparator is used. The ampoule is compared with the standards until a colour match is found.
Kits include 30 ampoules, comparator(s), accessory solution(s)(when necessary), a sample cup, and instructions. Refill packs of 30 ampoules and accessory solutions are available separately.
Comparators have a 2-year shelf life.
Material Safety Data Sheets are provided in test kits.
CHEMets ampoules are designed for maximum simplicity and accuracy. Each glass ampoule is 7 mm in diameter, 100 mm in length, with a tapered, pre-scored tip; reagents are vacuum-sealed inside.
Ordering Information:
Analyte: BROMINE
Method: DPD (Developed by CHEMetrics, Inc.)
Type: CHEMet
K-1605 0-2.2 & 0-11 ppm
Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Low and High Range Comparators, Activator Solution, 25 mL sample cup, instructions, and MSDS.
R-1605 Refill
A-1600 Activator Solution, six 10 mL bottles
A-0013 Sample Cup, 25 mL, package of six
C-1601 Comparator, 0-2.2 ppm
C-1605 Comparator, 0-11 ppm
k1605kit-msds