Specifications
- Measurement Range 0 to 100 %
- O2 Sensitivity (at sea level, 101.3 kPa) 12-13 mV in 21 % O2, 0.6 mV per % O2, 6 µV per 0.01 %
- O2 Response Time (time required to read 90 % of saturated response) 14 seconds
- Output at 0 % O2 2 % of output at 20.95 % O2 or 0.2 ± 0.1 mV
- Measurement Repeatability Less than 0.1 % of mV output at 20.95 % O2
- Non-linearity Less than 1 %
- Signal Decrease per Year 6.3 % per year (0.8 mV per year)
- Oxygen Consumption Rate 2.2 µmol O2 per day at 20.95 % O2 and 23 C
- Operating Environment -20 to 60 C, 0 to 100 % relative humidity (non-condensing), 60 to 140 kPa
- Input Voltage Requirement 12 V DC continuous (for heater), 2.5 V DC excitation (for thermistor Heater Current Drain 6.2 mA (74 mW power requirement when powered with 12 V DC source)
- Thermistor Current Drain 0.1 mA DC at 70 C (maximum, assuming input excitation of 2.5 V DC)
- Dimensions 32 mm diameter, 68 mm length
- Mass 175 g (with 5 m of lead wire) Cable 5 m of six conductor, shielded, twisted-pair wire
- Warranty 4 years against defects in materials and workmanship
Ordering information
SO-220