Request list

is empty

You are here

AMS Replaceable Tip Probes

If you cannot find the part number in the documentation please provide detail. Specific to this item, it could include part number or application detail, (ex. 20 meters of cable, or 20 litres of volume)

The heavy duty, AMS Replaceable Tip Soil Probe meets the need for a rugged sampler. It is the finest soil probe available. These heavier wall 4130 chrome plated alloy probes are fitted with a heat-treated, threaded tip for durability and easy replacement. The probes are chrome plated. Select these heavy-duty soil probes for sampling in tough soils and other materials.

Replaceable Tip Soil Probes and Soil Recovery Probes Extend the Life of your Soil Probes

The AMS Soil Probe is used for surface sampling. It cuts a sample slightly smaller than the inner dimension of the probe to facilitate easy sample removal. Outer dimension of the probe is slightly larger for ease of soil penetration.

BENEFITS AND FEATURES:
• Easily take and view soil samples with this probe.
• With added extensions, it is extendable to even greater soil depths.
• Open slot for easy removal of soil sample.
• Thread on cross handle for compact storage.

The probe is made of 4130 alloy steel with hardened tip and is available with chrome plating. Probes are also available in stainless steel for environmental use. All soil probes come complete with cross handle and are available with optional Slide Hammer attachments. Achievement of greater soil depths may be obtained by combining the AMS Soil Probe with the AMS extensions.

How to use:
Assemble probe using either the supplied Cross Handle or the optional Slide Hammer. Once the probe is assembled, drive it into the soil. Once sampling depth is achieved, retrieve soil sample by pulling back on the Cross Handle or tapping upward with Slide Hammer. Remove sample from probe and place into sample container.

Decontaminate the soil probe and repeat the above or add extension(s) to recover soil samples from the same hole at greater depths.

Ordering Information:

Replaceable Tip Soil Probe
The replaceable tip soil probe is similar to the AMS regular soil probe but has the added benefit of tip replacement. Economical, this 1" x 36" soil probe comes with an AMS regular coring tip, but can accommodate an optional heavy duty tip. It has been fitted with a 10" comfortably gripped cross handle.

5/8" Threaded, Nickel Plated
425.50 1" x 36" Plated Replaceable Tip Soil Probe

5/8" Threaded, Nickel Plated Accessories
425.74 1" Plated Heavy Duty Replaceable Tip

5/8" Threaded, Nickel Plated Replacement Parts
425.75 1" Plated Regular Replaceable Tip
401.26 10" Cross Handle w/Grips
425.77 Spanner Wrench

Replaceable Tip Soil Recovery Probe
Similar to the AMS soil recovery probe, the replaceable tip soil recovery probe can be used with liners. The 1 1/4" probe is available in either a 12" or 24" length, and comes with a 10” comfortably gripped cross handle, coring tip, spanner wrench, plastic liner and two plastic end caps. The exclusive “Reach and Grab” system is featured in these probes.

5/8" Threaded, Nickel Plated
425.45 1 1/4" x 12" Plated Replaceable Tip SRP
425.47 1 1/4" x 24" Plated Replaceable Tip SRP

Dual Purpose Replaceable Tip Soil Recovery Probe
The dual purpose replaceable tip soil recovery probe is similar to the dual purpose soil recovery probe, and can be used with or without liners, but is enhanced with the ability to replace worn out tips. The 1 1/4" slotted probe is available in either a 12" or 24" length, and comes with a 10” comfortably gripped cross handle, coring tip, spanner wrench, plastic liner and two plastic end caps. The exclusive “Reach and Grab” system is featured in these probes.

5/8" Threaded, Nickel Plated
425.65 1 1/4" x 12" Plated Dual Purpose Replaceable Tip SRP
425.67 1 1/4" x 24" Plated Dual Purpose Replaceable Tip SRP

5/8" Threaded Replacement Parts
425.76 1 1/4" Plated SRP Replaceable Tip
440.08 1 1/8" Plated SRP Cap
401.26 10" Cross Handle w/Grips
425.02 1" x 12" Plastic Liner
425.04 1" x 24" Plastic Liner
425.18 1" Plastic End Caps
425.77 Spanner Wrench