AMS Multi Stage Core Sampler

Multi-Stage Soil Core Sampler collects core samples of various lengths

This stainless steel sampler collects 2″ cores up to 48″ deep when the optional 12″ multi-stage SCS sections are attached. The sampler base and optional sections, vented top cap and auger tips are made from 300 series stainless steel. The coring tips are made from heat treated 400 series stainless steel. This sampler is sized by the liner OD and has a diameter of 2 3/8″. It takes a 2″ liner.

Add to Request
SKU: AMS 403.XX Categories: , ,

The AMS Multi-Stage Core Sampler is a heavy duty, all stainless steel sampler designed to enable you to extend the sampler in twelve-inch sections. This allows you to take continuous samples in 12″ increments from 12″ to a maximum of 72″ depending on soil conditions.

AMS Multi-Stage Core Samplers are made of the highest quality stainless steel tubing available. The AMS Multi-Stage Core Sampler comes with two tips, a core tip and an auger tip. The core tip is made of 400 series stainless steel and is heat-treated and case hardened for long life. The auger bits are made of 304 series stainless steel. The Sampler has an O.D. of 2 3/8″ and will accept 2″ AMS Liners. All components are also available separately. Slide hammers, extensions, liners and plastic end caps will work with these items

Includes: Multi-stage SCS base, solid cap, soil core tip, auger tip, 2″ x 12″ stainless steel liner, 2 plastic end caps and universal slip wrench.

Ordering Information:

Order the optional 12″ multi-stage SCS sections separately #403.23.

5/8″ Threaded, Stainless Steel
403.27 Multi-Stage SCS Complete

Threaded, Stainless Steel Replacement Parts
403.22 Multi-Stage SCS Solid Cap
403.24 2″ x 12″ Multi-Stage SCS Base (Female Ends)
403.25 Multi-Stage SCS Core Tip
403.26 Multi-Stage SCS Auger Tip
405.14 2″ x 12″ SST Liner
418.10 2″ Plastic End Caps
421.29 Universal Slip Wrench

Stainless Steel Accessories
403.23 12″ Multi-Stage Section (Female and Male ends)


Weight 5 kg
Scroll to Top