The 10HS Soil Moisture Sensor is the newest member of the Decagon Soil Moisture Sensor Family. The large sphere of influence meets the needs of those customers who would like to measure the volumetric water content of a large soil sample volume. The 10HS obtains volumetric water content by measuring the dielectric constant of the media through the utilization of capacitance/frequency domain technology. In addition, the 10HS sensors incorporate a high frequency oscillation, which allows the sensor to accurately measure soil moisture in any soil or soilless media with minimal salinity and textural effects.
An on-board voltage regulator allows Decagon factory calibrations to be used with any excitation voltage above 3V. In addition, the list of factory calibrations for the 10HS includes a dielectric calibration for use with the Topp Equation or other applicable dielectric to volumetric water content conversion equations.
10HS SOIL MOISTURE SENSOR APPLICATIONS:
Irrigation scheduling
Vadose zone monitoring
Plant-soil-water interaction studies
SECIFICATIONS:
Range: 0-100% VWC
Resolution: 0.1 Dielectric
Accuracy:
Mineral Soil: ±2.5 up to 50 dielectric permittivity ±2% VWC soil specific calibration, up to 8 dS/m
Rockwool: ±3% VWC, 0.5 to 8 dS/m
Potting Soil: ±3% VWC, 3 to 14 dS/m
Output: Voltage, correlated linearly with VWC, independant of excitation voltage
Measurement Time: 10 ms
Dimensions: 14.5 cm x 3.3 cm x 0.7 cm
Temperature: -40°C to +50°C
Power: 3 to 15 VDC, 12 mA @3V, 15 mA @ 15V
Cable Length: 5 m
Connector Types: 3.5 mm “stereo” plug or stripped and tinned lead wires (3)
Datalogger Compatibility (not exclusive): Decagon: Em50, EM50R, ProCheck, ECH2O Check Campbell Scientific: CR10X, 21X, 23X, CR1000, CR3000, etc.
Other: Any data acquisition system capable of 3-15 VDC excitation and single ended voltage measurement at 12 bit or better resolution.
Ordering Information:
ECHO 10HS Soil Moisture Sensor