Request list

is empty

You are here

ORS Oil and Water Interface Probe

This probe is designed to accurately measure the depth to hydrocarbon layers and water in monitoring wells and tanks. It can fit into wells as small as .75" in diameter.

Oil and Water ORS Interface Probe for free floating product

Rugged and durable, yet lightweight
Housing made from NEMA 3 weather resistant, rugged aluminum.
Includes tape cleaner attachment for preventing dirt and hydrocarbons from entering the reel assembly, probe and measuring tape.

Factory Mutual Approved
The standard 100' ORS Interface Probe is intrinsically safe and Factory Mutual Approved for use in Class 1, Division 1, Group D hazardous locations.

Highly accurate and dependable measurements
Depth of fluid measurements are accurate to within 1/100'. Can detect hydrocarbon layers as thin as 1/200'.

Trigger-style brake lever
Holds the tape in position while measurements are recorded.

Field replaceable optical sensing prism
Audible and visible alarms activated when probe makes contact with oil or water

Power 9 Volt DC (six field replaceable AA size batteries,must be Duracell Type MN1500 for intrinsic safety and Factory Mutual Approved)

Detectors Optical prism (includes field replaceable spare)&conductivity sensorApprovals Intrinsically Safe and Factory Mutual Approved for use in Class 1, Division 1, Group D hazardous locations as defined by the National Electrical Code (NEC)

Dimensions 12" x 12" x 4" (30.48 x 30.48 x 10.16 cm)Standard or Chemical probe: 1" in diameter Small Probe: 5/8" in diameterWeight 7.8 lbs. (2.9 kg)

Enclosure rating NEMA 3

Accuracy Measurements of fluid depth accurate to within 1/100' (3.05 mm), detection of hydrocarbon layers as thin as 1/200 (1.52 mm)

Standard Lightweight, rugged ABS carrying case

Warranty 1 year

Video