Designed for panel mounting the Mini-Timer allows the pre-set time to be set, and the running time to reset to be displayed beneath a clear cover. It is based on a clock mechanism.
Features
• Short interval
• Panel mounting with clip
• Low cost
• Compact
• Easy to read dial
• Easy pre-set
• Only 2 M5 connections
• Maintenance free
• Light and durable
• DIN mount accessories
• Normally closed 3/2
• 2-6 bar
The Mini-Timer has only two ports, using input port 1 as the control port (via internal connections). Exhaust air escapes through the body. There are 3 models for time ranges up to 300 seconds delay (See chart below).
Setting the timer is easy. Use the control knob to set the required time delay. When air is supplied to port 1, the timer will start to operate. Time to 0 is displayed. On reaching 0 the timer operates and an output to port 2 is given. The valve remains in this condition until air to port 1 is removed, or pulsed to reset.
Ordering Information
0.499.520 0.2 – 3 seconds 3/2 Normally Closed
51.020.33.00 0.2 – 3 seconds 3/2 Normally Closed
0.499.500 2 – 30 seconds 3/2 Normally Closed
51.020.03.00 2 – 30 seconds 3/2 Normally Closed
0.499.540 1 – 120 seconds 3/2 Normally Closed
51.020.34.00 1 – 120 seconds 3/2 Normally Closed
0.499.550 20 – 300 seconds 3/2 Normally Closed
51.020.30.00 20 – 300 seconds 3/2 Normally Closed
1.405.611 Protective Cover with Knob
1.405.612 Protective Cover with Lock
51.031.00.00 Din Rail Adaptor M5 with Clip
1.499.511 Din Rail Adaptor only M5
3.513.306 Clip to suit H Rail
0.499.350 Auto reset module (0.2 – 2 seconds)
51.020.35.00 Auto reset module (0.2 – 2 seconds)
k-minitimer-spec-sheet-2008