Panel Mount Pneumatic Timers

Features:

• Short and long interval versions
• Panel mounting
• Precise time regulation
• Normally Open or Closed
• Easy to read clock face display
• Visible timer hand
• M5 connections
• Maintenance free
• Simple, fast and tidy installation
• Very durable
• Steel spool valve
• Panel cut out 66mm x 66mm

Designed for panel mounting the 54 includes a 5/2 valve with M5 ports, mounted on the back body. The concept is to be able to operate as a NO (normally open) or NC (normally closed) 3/2 valve on time out, by plugging one of the ports. The 54 pneumatic timer depends on a constant bleed of air to operate a clockwork mechanism. This control air then bleeds out to exhaust through a sintered filter on the back of the unit.

Setting the timer is easy. Position the red time hand to the required delay period. When the control air is supplied (to port 12) the timer will start to operate. Time elapsed can be seen on the moving hand. On reaching 0 the timer operates and switches the valve on the rear of the unit. The valve remains in this condition, and control air continues to bleed through the clockwork mechanism, until control air is either removed, or pulsed to restart.

Ordering Information:

54.021 0.3 – 10 seconds Normally Open/Closed
54.022 3 – 100 seconds Normally Open/Closed
54.023 0.3 -10 minutes Normally Open/Closed
54.024 3 – 100 minutes Normally Open/Closed
54.025 0.3 – 10 hours Normally Open/Closed
54.026 3 – 100 hours Normally Open/Closed
54.050 As 54.021 Rotor Stop Special
54.051 As 54.022 Rotor Stop Special
54.052 As 54.023 Rotor Stop Special
54.053 As 54.024 Rotor Stop Special
54.054 As 54.025 Rotor Stop Special
54.055 As 54.026 Rotor Stop Special