Advantages:
• Advanced, positive-sealing air valves with built-in filtration
• Tolerant of high temperatures
• Complete disassembly with only one wrench
• All-stainless-steel body
• Domed bottom to prevent hang-ups during installation
• Durable Ebonite float
• Lightweight pump
Operation
The SRX LP is installed to the desired draw-down level. It requires only three lines: air supply, air exhaust and fluid discharge. Compressed air is supplied to the pump (generally 0.5 psi per foot of depth is sufficient).
As the liquid enters the bottom of the pump through the inlet screen, the internal float moves to the upper (or “ON”) position. At that end point, the float opens the air valve. Air enters the pump, closes the bottom inlet check valve, and pushes the fluid (in the pump chamber) through the centre discharge tube and all the way to the surface.
As the fluid is expelled from the vessel, the float returns to the lower limit (or “OFF” position) at which point it closes the air inlet valve and opens the air exhaust valve. As the pump fills under the fluid’s own static pressure, air is vented through the exhaust port and the cycle is automatically repeated based on the well recharge rate.
Better Value:
• More Uptime:
– Reliability
– Simple Routine Maintenance
• Competitive Price
• Easy Replacement for Existing Pump
• Few Parts – Low Inventory
SPECIFICATIONS
Pump OD: 3.5 in (90mm)
Pump Length: 39 in (990mm)
Volume per Cycle: 0.4 US gal (1.5 litres)
Min. Submergence: 29.1 in (740mm)
Pump Weight: 17.5 lb (8kg)
Max. Flow Rate: 9.5 gpm (36 lpm)
Ordering Information:
TR-970 SRX LP Landfill Pump
TR-971 SRX LP Landfill Pump (short)
srx-lp-spec-sheet-2009