SDI-12 Converter

The SDI-12 converter translates the Modbus protocol used by TriOS sensors into SDI-12 and thus serves as an interface between the sensors and the SDI-12 interface of the peripherals.

Add to Request
SKU: 11C100001 Categories: ,
Due to its low standby power (< 20 mW) it is perfectly suited for operation with a battery as power supply. Four status LEDs inform the user continuously about the current operation mode and power supply. Both, measurements with G2 sensors and wiper cleaning cycles can be controlled via the converter. The implemented Ethernet interface allows data export and sensor configuration via the web interface.
With three manual buttons Sensor Scan, Wiper Cleaning and Service Mode can be activated. The position of the rotary encoder determines the sensor address via which the sensor is addressed.

SDI 12 Converter Datasheet

EXTERNAL POWER SUPPLY
Power supply
12…24 VDC (± 10 %)
Connection terminal
1.5 mm²
AWG 16
SDI-12 INTERFACE
Power supply
10…24 VDC (± 10 %)
Power consumption in standby
< 20 mW
Protocol
SDI-12
WIPER INTERFACE
Connection terminal
1.5 mm²
AWG 16
Standard
W55 Wiper
SENSOR INTERFACE
Connection terminal
1.5 mm²
AWG 16
Standard
RS485
Protocol
Modbus RTU
NETWORK*
Standard
Ethernet
Connection
RJ45
AMBIENT
Operating temperature
0…+40 °C
~ +32 °F to +104 °F
Storage temperature
-10…+70 °C
~ 14 ˚F to 158 ˚F
Relative air humidity
0…95 % (non-condensing)
Protection type
IP30
NEMA 1
DISPLAY
LED
4x RGB Status LED
MECHANICS
Housing material
PVC, Perspex
Dimensions (L x W x H)
120 mm x 80 mm x 45mm
~ 4.7” x 3.2” x 1.8”
Weight
250 g
~ 0,6 lbs
Maintenance effort
Calibration/maintenance interval
System compatibility
SDI-12
Warranty
1 Year (EU & US: 2 Years)
* Only available if the connected sensor has an Ethernet interface.
Scroll to Top