Standard Inclinometer Casing

Standard Inclinometer Casing is specially designed for inclinometer test systems and its versatility renders it suitable for use in landfills, cast to concrete or attached to structures. You can use Standard Inclinometer Casing in boreholes by embedding it into fill material. The casing moves with the ground, material or structural movement and provides inclination information over an extended period of time.

Features:

• Deep, tight groove profile ensures accurate data
• Available in 70mm and 85mm outer diameters
• Manufactured from virgin ABS

Standard casing is available in both 70mm and 85mm outside diameters and is suitable for most construction and civil engineering projects.

Benefits:

• Cost effective
• Reduced wastage: casing can be cut and joined at any point along its length
• Can be used in conjunction with magnetic extensometers to form a combined inclinometer/extensometer

Ordering Information:

Standard Inclinometer Casing – 70mm Outer Diameter
C18-70.1 Inclinometer casing 70mm outer diameter, 3 metre length
C18-70.2 Coupling 77mm outer diameter, 160mm length
C18-70.4 Bottom cap
C18-70.5 Telescoping coupling 77mm outer diameter, 400mm length, 75mm range
C19-70.6 Lockable top cap assembly Includes 150mm length ABS tube, rivets, cap, bar and padlock
C9-1.4 Top cap

Standard Inclinometer Casing – 85mm Outer Diameter
C18-85.1 Inclinometer casing 85mm outer diameter, 3 metre length
C18-85.2 Coupling 91mm outer diameter, 200mm length
C18-85.3 Telescoping coupling 91mm outer diameter, 380mm length, 75mm range
C18-85.7 Lockable top cap assembly Includes 200mm length ABS tube, rivets, cap, bar and padlock
C18-85.4 Bottom cap
C18-85.5 Top cap

Inclinometer Head Works
C9-3.6 Security Cover Includes 4inch diameter 500mm length steel tube, cap, bar and padlock
C9-3.7 Lockable heavy duty stopcock cover

Installation Equipment
C9-3.1 Riveting kit – 70mm outer diameter casing. Tool box includes tube support plate, hand drill, 3.3mm diameter drill, 300 No 3.2mm diameter rivets, riveting tool, sealing tape, mastic and mastic tool. Sufficient for 100 metres of casing.
C9-3.2 Rivets for standard couplings Per 1000, 4 rivets required per standard coupling, 3.2mm diameter
C9-3.3 Rivets for telescoping couplings Per 1000, 4 rivets required per telescoping coupling, 4mm diameter
C9-3.10 Riveting tool
C9-3.11 Hand drill
C9-3.4 Sealing mastic 1 tube per 20 couplings
C9-3.5 Mastic applicator
C9-3.8.1 Tube support plate For 70mm outer diameter casing
C9-3.8.2 Tube support plate For 85mm outer diameter casing
C9-3.12 Drill bit for rivets For use with standard couplings C9-3.2. (3.3mm diameter)
C9-3.9 Drill bit for rivets For use with telescoping couplings C9-3.3. (4.2mm diameter)
W6-4.3 Sealing tape 1 roll per 6 couplings. 1 roll per 2 telescoping couplings.

Manuals
MAN-171 Bentonite cement ‘grout mix’ guide
MAN-187 Horizontal riveted inclinometer casing installation
MAN-201 Riveted inclinometer casing installation