Request list

is empty

You are here

PowerProbe 9300-TR

If you cannot find the part number in the documentation please provide detail. Specific to this item, it could include part number or application detail, (ex. 20 meters of cable, or 20 litres of volume)

The 9300-TR comes standard with the 175 ft-lb hydraulic hammer, and the option to upgrade to other hammer models. For those situations where you need to install groundwater monitoring wells, you can add an auger drive head. With the choice of two different auger drive heads, and 2 different hammer options, you can’t go wrong with the 9300-TR. Some carrier vehicle requirements may be required dependent on the options chosen.

AMS PowerProbe Model 9300-TR Direct Push Rig

The AMS PowerProbe™ functions as a dual-combination environmental and geotechnical drill rig. This, combined with its dual capabilities of both direct push and Hollowstem augering, assures completion of comprehensive, complex field work. The versatility of the AMS PowerProbe™ and its tooling will be a key factor in your field success.

Direct Push Drilling Technology
Direct Push Drilling Technology (direct push) allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology. This is conducted using a combination of the static weight of an AMS direct push drill rig, hydraulic down pressure, and rapid hydraulic hammering. For some direct push techniques, such as Cone Penetration Testing (CPT), rapid hydraulic hammering is not used. Compared to conventional drilling activities, direct push technology:

• Is less labour intensive.
• Offers quicker setup time.
• Is easier to decontaminate and maintain tooling.
• Generates significantly less drill cuttings.
• Versatility provides investigators with a variety of soil investigation options.

Hollowstem Augering
Conventional hollowstem augering techniques are used to drill boreholes for environmental and geotechnical sampling activities, including lithologic description, chemical analysis, and monitoring well installation. The addition of Hollowstem augering capabilities to the AMS PowerProbe™ has greatly improved efficiency in the field.

Benefits Include:
• Ability to auger through difficult lithologies, including hardpan, resulting in less need for multiple drill rigs for complicated field situations.
• Ability to carry out direct push activities, telescopically, through the hollowstem auger, increasing the versatility of direct push tooling.

Standard Features
• Adjustable mast
• Long lasting powder-coated finish
• Anodised metal power track
• Electro-hydraulic valves – in-out,
side-side, and tilt
• Spring-loaded pull yoke
• Enhanced control panel
• One year warranty
• 175 ft-lb hydraulic hammer

Convenience/Safety Package
• Hand auger to pre-clear soil boring locations
• Hydraulic oil pressure gauges
• Emergency stop system
• 12 volt accessory outlet
• Hour meter
• Tooling vise and storage• 12 volt outlet
• Tooling vise
• Storage for pendant control

Power
Required Horsepower
......................40 hp or higher

Dimensions
Weight (app)................2,700 lb
Overall Length...................74"
Overall Width....................60"
Overall Height..................110"
Mast Extended...................162"
Probe Stroke.....................72"
Optional Probe Stroke............80"

Hydraulics
Hydraulic Oil Pressure.....2,400 psi
Oil Flow......................20 gpm
Hydraulic Oil Cooler
...................18,000 BTU single
Hydraulic Oil Capacity........30 gal

Hydraulic Operation
Down Force.................29,000 lb
Pull-Up Force..............41,000 lb
Head Travel Rate Up...........17 sec
Head Travel Rate Down.........10 sec
In/Out Travel....................12"
Horizontal Traverse............26.5"
Foot Vertical Stroke.............36"
Probe Angles.......80 to 100 degrees

Hydraulic Hammers
Standard Hammer - AR-48
...............175 ft-lb - 1,500 bpm
Optional Hammer - S-21
...............201 ft-lb - 2,200 bpm

Auger Drive Head
Optional 2-Speed.........3,400 ft-lb
2-Speed, Hi=150 rpm, Low=35 rpm
Optional 2-Speed.........2,400 ft-lb
2-Speed, Hi=150 rpm, Low=40 rpm