Request list

is empty

You are here

PowerProbe 9100-VTR-D

If you cannot find the part number in the documentation please provide detail. Specific to this item, it could include part number or application detail, (ex. 20 meters of cable, or 20 litres of volume)

The 9100-VTR model is the newest track model to the AMS line of track mounted PowerProbes and provides two power source options, diesel and propane. The 9100-VTR-D (diesel) provides explosive power when size matters. It provides easy access and mobility and can even access through a 36" gates. The small footprint of this rig makes it a perfect rig for small residential areas, tanks, farms, and gated areas. Mounted with transport hooks, this rig can be air-lifted into remote job location. Features a 175 ft-lb hammer and runs off of remote control.

9100-VTR-D (diesel) provides explosive power

The AMS PowerProbe™ functions as a dual-combination environmental and geotechnical drill rig. This, combined with its dual capabilities of both direct push and Hollowstem augering, assures completion of comprehensive, complex field work. The versatility of the AMS PowerProbe™ and its tooling will be a key factor in your field success.

Direct Push Drilling Technology
Direct Push Drilling Technology (direct push) allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology. This is conducted using a combination of the static weight of an AMS direct push drill rig, hydraulic down pressure, and rapid hydraulic hammering. For some direct push techniques, such as Cone Penetration Testing (CPT), rapid hydraulic hammering is not used. Compared to conventional drilling activities, direct push technology:

• Is less labour intensive.
• Offers quicker setup time.
• Is easier to decontaminate and maintain tooling.
• Generates significantly less drill cuttings.
• Versatility provides investigators with a variety of soil investigation options.

Hollowstem Augering
Conventional hollowstem augering techniques are used to drill boreholes for environmental and geotechnical sampling activities, including lithologic description, chemical analysis, and monitoring well installation. The addition of Hollowstem augering capabilities to the AMS PowerProbe™ has greatly improved efficiency in the field.

Benefits Include:
• Ability to auger through difficult lithologies, including hardpan, resulting in less need for multiple drill rigs for complicated field situations.
• Ability to carry out direct push activities, telescopically, through the hollowstem auger, increasing the versatility of direct push tooling.

Standard Features
• Rubber tracks for minimal ground disturbance
• Long lasting powder-coated finish
• Anodized metal power track
• Electro-hydraulic valves – in-out, side-side, and tilt
• Spring-loaded pull yoke
• Enhanced control panel
• One year warranty
• Tooling storage
• 175 ft-lb hydraulic hammer
• Adjustable mast for angled probing
• Transport hooks

Convenience/Safety Package
• Hand auger to pre-clear soil boring
locations
• Hydraulic oil pressure and temperature
gauges
• Emergency stop system
• Pendant remote with 15' cord
• 12 volt outlet
• Tooling vise
• Storage for pendant control

Power
Horsepower.......................26 hp
Power Source
.......Vanguard 3LC-950D diesel engine
Fuel Capacity (diesel)..........10 gal
Track Speed....................2.8 mph

Dimensions
Weight (app)..................3,100 lb
Overall Length.....................84"
Overall Width......................34"
Overall Height (folded)............66"
Mast Extended.....................130"
Probe Stroke.......................56"

Hydraulics
Hydraulic Pressure (system)
............................2,100 psi
Hydraulic Flow Rate (system)
...............................10 gpm
Hydraulic Oil Cooler
....................18,000 BTU single

Hydraulic Operation
Down Force..................19,950 lb
Retraction Force............26,250 lb
Side-to-Side Movement.............10"
In/Out Travel.....................14"
Foot Up-Down......................32"

Hydraulic Hammers
Standard Hammer - AR-48
............175 ft-lb - 1,500 bpm