PowerProbe 1 5/8″ Heavy-Duty Expendable Tip Injection Tooling

Expendable Tip Injection Tooling Injects Below the Contamination.

The injection of remediation compounds or remedial solutions has rapidly become a widely accepted approach for addressing contaminated sites. AMS injection tooling may be used with a wide variety of remedial injection compounds, as well as standard bentonite based grout mixes. The tooling may also be adapted to any injection pump system. Include the back-flow prevention check valve to eliminate back-flow or back pressure problems while injecting into the formation.

Add to Request

Remediate subsurface soil and/or groundwater contaminants with the expendable tip (drop-out) injection direct push tool. This versatile tool was designed for achieving great depths, thus allowing for the construction of a complete barrier under the contaminant. The expendable tip remains at the bottom of the hole.

• Inject or grout while pulling up (bottom-up)
• Usable with a wide variety of remedial solutions
• Highly effective at great depths
• Highly effective in loose or coarse lithology

Features include:

• Ability to inject a variety of remedial solutions
• Adaptable to any injection pump
• Use of the interchangeable and versatile tips, injection adapter, and extensions with other AMS direct push tooling
• Optional injection check ball adapter prevents back flow
• Various tip options available for multiple injection purposes, including injection into sand, gravel, silt, and clay aquifers

Remediation Applications:

Contaminated soil is remediated by injecting a suitable remediation compound into the material. The remediation compound is injected into the contaminated soil through an injection tip. The remediation compound may be adjusted to adapt to varying site conditions and contaminants.

Ordering Information:

1 5/8″ Heavy-Duty Expendable Tip Injection Tooling

5006.92 1 5/8″ x 2’ DP Extension
5006.94 1 5/8″ x 4′ DP Extension
5006.95 1 5/8″ x 5′ DP Extension

5006.88 1 5/8″ Expendable DT Holder, Threaded

5006.86 1 5/8″ Pull Cap

5006.85 1 5/8″ Drive Head Adapter

5004.45 3/16″ Twist-to-Lock Connector
5004.43 1/4″ Twist-to-Lock Connector

5006.96 1 5/8″ Injection Coupler

52474 1 5/8″ Back-flow Prevention Check Valve

Weight 500 kg
Scroll to Top