You are here
TE-5000 High Volume TSP Monitor
TSP (Total Suspended Particulate) High Volume Air Sampler: Complete with outdoor anodised aluminium shelter, aluminium blower motor assembly, 8" x 10" stainless steel filter holder, motor speed-voltage control/elapsed time indicator, 7-day mechanical timer, and continuous flow/pressure recorder (110v/60hz or 220v/50hz)
The High Volume Air Sampler is the recommended instrument for sampling large volumes of air for the collection of TSP (Total Suspended Particulate). The physical design of the sampler is based on aerodynamic principles which result in the collection of particles of 100 microns (Stokes Equivalent Diameter) and less. The TE-5000 TSP sampler consists of a TE-5001 Anodised Aluminium Shelter, TE-5003 8”x10” Stainless Steel Filter Holder, TE-5005 Aluminium Blower Motor Assembly, TE-5007 7-Day Mechanical Timer, TE-5009 Continuous flow/pressure recorder, and TE-5010 Motor Voltage Control.
• Ambient air monitoring to determine suspended particulate levels relative to air quality standards.
• Impact of a specific source on ambient levels of suspended particulates by incorporating a "wind-direction-activation" modification which permits the sampler to operate only when conditions are such that a source-receptor relationship exists.
• Monitoring of enclosed environments for relatively high levels of particulate matter, particularly toxic materials.
• Monitoring of emissions from large diameter vents where physical conditions preclude the use of conventional stack-testing equipment.
Inlet collection efficiency: Meets EPA Code of Federal Regulation Appendix B to Part 50
Flow rate: 39 cfm – 60 cfm (1.1 to 1.7m³)
Filter media: Glass Fiber Filter 8" x 10" (TE-G653)
Flow control: Motor-Speed-Voltage Control/Elapsed Time Indicator (TE-5010)
Motor blower: 2-stage vacuum 0.6 HP 110v/60hz (TE-116311) 220v/50hz (TE-116312)
Flow Indicator: Continuous Flow/pressure recorder (TE-5009)
Shipping Information: Size: 45.5" x 22.5" x 20" sampler carton, 19" x 14" x 14" lid carton
Weight: 70 lbs. – sampler carton, 9lbs. – lid carton
Power Requirement Single phase with earth ground, 110v/60hz or 220v/50hz
Motor Specifications: 110v/60hz – Part #TE-116311, 2-stage vacuum 0.6 HP, double ball bearing thru-flow discharge 220v/50hz – Part #TE-116312, 2-stage vacuum 0.6 HP, ball/sleeve bearing, thru-flow discharge
Altitude Application: to 10,000 feet above sea level
Ambient Temperature Application: -30 to + 50ºC
Relative Humidity Application: 0 - 100%
Sample Delay Start Range: 0 - 7 days
Start up amps: 12 amps
Running amps: 6 amps
Available with Brushless Motor
TE-5000 High Volume TSP Monitor Please specify 110v/60hz or 220v/50hz
TE-5001 Anodized Aluminium Shelter
TE-5001-10 Gabled Roof
TE-5007 7-Day Mechanical Timer
TE-5009 Continuous Flow Recorder
TE-5010 Motor Voltage Control
TE-5005 Blower Motor Assembly with tubing
TE-5003 8” x 10” TSP Stainless Steel Filter Holder
TE-5005-9 Filter Holder Gasket
Envelope with TE-106 box of charts, and literature.
TE-106 4" Flow Recording Chart (24 hour period) (100 per box)
TE-116125 Motor for 220V PUF System for 220V
TE-116311 Motor for 110V Blower Motor Assembly for Manual and Mass Flow Controlled Systems
TE-116312 Motor for 220V Blower Motor Assembly for Manual and Mass Flow Controlled Systems for 220V
TE-160 Recorder Pen Point, Red Ink each (6 per pack)
TE-3000 Filter Media Holder/Filter Paper Cartridge 8” x 10”
TE-33378 Brushes (Set of 2) for 220V Motor TE-116312 and TE-116111 for 220V
TE-33384 Brushes (set of 2) for 110V Motor TE-116311 and TE-116336
TE-5005-4 Motor Cushion
TE-5005-9 Filter Holder Gasket (Between Filter and Blower Motor)
TE-5018 8" x 10" Gasket each (2 required)
TE-5028 Recommended for all TSP and PM 10 Systems. Variable Flow Calibration Orifice, NIST Traceable Calibration Certificate, Adapter Plate, Slack-Tube Manometer, Tubing and Carrying Case.
TE-G653 Glass Fibre Filter Media 8" x 10" for TSP (100 per box)