Request list

is empty

You are here

EXO Conductivity Sensor

The EXO combination conductivity and temperature sensor should be installed in a sonde in nearly all sonde applications. Not only will this sensor provide the most accurate and fastest response temperature data, but it will also provide the best data for the use in temperature compensation for the other EXO probes. The conductivity data is used to calculate salinity, non-linear function (nLF) conductivity, specific conductance, and total dissolved solids, and compensate for changes in density of water (as a function of temperature and salinity) in depth calculations if a depth sensor is installed.

Like all EXO sensors it will remember its calibration, so it can be calibrated in the lab and installed in the field

Outputs of specific conductance (conductivity corrected to 25˚C) and total dissolved solids are also provided. The values are automatically calculated from conductivity according to algorithms found in Standard Methods for the Examination of Water and Wastewater (Ed. 1989).

Like all EXO sensors it will remember its calibration, so it can be calibrated in the lab and installed in the field

SPECIFICATIONS
Range: 0 to 200 mS/cm
Accuracy: 0 to 100: ±0.5% of reading or 0.001 mS/cm, w.i.g.; 100 to 200: ±1% of reading
Response: T63<2 sec
Resolution: 0.0001 to 0.01 mS/cm (range dependent)

Ordering Information:

599870-01 EXO Conductivity/Temperature Sensor, Ti "EXO Conductivity/Temperature Sensor, Ti
- Compatible with any EXO sonde
- new flow channel design and high accuracy temperature
- Incorporates wet-mate connector and welded titanium housing

Video