You are here
Ideal wherever the highest degree of purity is required, max. suction lift 5 m (depending on medium).
With the MiniSampler PTFE the sample liquid only comes into contact with the suction hose and the sample bottle; the possibility of cross-contamination is greatly reduced therefore. Immediately after having taken the sample, the bottles are sealed using an airtight cap and with tamper-evident safety ring seal.
The single-use, flexible, suction hose can be quickly replaced, thus ensuring that the samples are never contaminated. If necessary, a new hose can be used for every single sample.
Due to its small diameter (8 mm) and flexibility the hose can reach sampling areas which are otherwise inaccessible.
Also suitable for viscous oils.
Not for aggressive acids as vapours could destroy pump.
MiniSampler PTFE complete with accessories in transport case. Contents:
• 1 PFA bottle 180 ml
• 5 m PTFE suction hose 6 x 8 mm
• 1 hose cutter
• 1 hose weight made of stainless steel AISI 304
• 20 seal-it bottle seals
1. Place hose and bottle in pump.
2. Insert hose end to desired sample depth.
3. Move the pump piston back and forth and collect the sample. The liquid flows directly into the bottle.
4. Take off the filled bottles, close and label them.
MiniSampler case, PTFE
5305-0110 MiniSampler case, PTFE
6205-0090 Sample bottle, PFA, 90 ml
6205-0180 Sample bottle, PFA, 180 ml
5399-0004 Label Reference Sample, sheet of 24 adhesive labels
5305-0011 MiniSampler pump w/o Adapter
0006-9506 Hose cutter
5305-1020 Adapter PTFE for sampling tubs, PFA 90 ml and 180 ml
5305-0209 Adapter for glass thread GL 45